BMW M 1000 RR 2021 Rider's Manual page 152

146 ON THE RACE TRACK
Clean thread 1.
Pull off protective cap 2 and
slide on the gearshift rod 4.
Remove bolt 3 with washer.
Transfer the gearshift rod 4
to the thread for the inverted
gearshift pattern 1.
Insert bolt 1 through ball
joint 2 and washer 3.
Install bolt 1 in thread for in-
verted gearshift pattern 4.
Selector rod to gearshift
lever
Thread-locking compound:
micro-encapsulated
8 Nm
Install protective cap 5.
The gearshift-pattern reverser
for racing is set up.