Table of Contents
Advertisement
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present. Secondary boot display selection will
appear based on your selection.
The optional settings are: [VBIOS Default]; [HDMI]; [DVI]; [CRT].
* Note: When set as [HDMI], [DVI] or [CRT], user can make further settings in
'Second IGFX Boot Display'.
Second IGFX Boot Display
Use this item to select second IGFX boot device..
The optional settings are: [Disabled]; [HDMI]; [DVI]; [CRT].
► PEG Port Configuration
Press [Enter] to make settings for the following sub-items:
PEG Port Configuration
PEG(PCIE1 Slot)
This will show current device connected to PCIE1 slot.
Max Link Speed
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
► Memory Configuration
Press [Enter] to view brief information for the working memory module.
PCH-IO Configuration
►
Press [Enter] to make settings for the following sub-items:
USB Controller
The optional settings are: [Disabled]; [Enabled].
HD Audio
The optional settings are: [Disabled]; [Enabled]; [Auto].
Onboard Lan1 Controller/ Onboard Lan2 Controller
Use this item to enable or disable LAN1/LAN2 device or controller.
► Wake on LAN
Use this item to enable or disable integrated LAN to wake on system. This item
is for Onboard Lan1 only.
The optional settings are: [Enabled]; [Disabled].
PCIE3 Slot
Use this item to enable or disable the PCI Express Root Port.
The optional settings are: [Disabled]; [Enabled].
System State after Power Failure
Use this item to specify what state to go to when power re-applied after a power
failure (G3 state).
The optional settings are: [Always On]; [Always Off]; [Former State].
31
Advertisement
Table of Contents
