Table of Contents
Advertisement
Notice!
The BIOS options in this manual are for reference only. Different
configurations may lead to difference in BIOS screen and BIOS
screens in manuals are usually the first BIOS version when the board
is released and may be different from your purchased motherboard.
Users are welcome to download the latest BIOS version form our
official website.
The BIOS is a program located on a Flash Memory on the motherboard. This program
is a bridge between motherboard and operating system. When you start the
computer, the BIOS program will gain control. The BIOS first operates an auto-
diagnostic test called POST (power on self test) for all the necessary hardware, it
detects the entire hardware device and configures the parameters of the hardware
synchronization.
the computer to operating system (OS). Since the BIOS is the only channel for
hardware and software to communicate, it is the key factor for system stability, and in
ensuring that your system performance as its best.
3-1
Entering Setup
Power on the computer and by pressing <Del> immediately allows you to enter Setup.
If the message disappears before your respond and you still wish to enter Setup,
restart the system to try again by turning it OFF then ON or pressing the "RESET"
button on the system case. You may also restart by simultaneously pressing <Ctrl>,
<Alt> and <Delete> keys.
system does not boot, an error message will be displayed and you will again be asked
to
Press <Del> to enter Setup/ Press <F7> to enter Popup Menu.
Chapter 3
Introducing BIOS
Only when these tasks are completed done it gives up control of
If you do not press the keys at the correct time and the
19
Advertisement
Table of Contents
