Before You Begin - Software Update / Kit Variations For "Aux" Instruments - Roland TD-27 Manual

Before You Begin - Software Update
UPDATE TO TD-27 MODULE SYSTEM VERSION 1.10
This kit or kit collection from The eDrum Workshop was created on a Roland TD-27 running system program version 1.10.
Due to this, these kits can only be loaded on a TD-27 module that is running version 1.10 or higher. The update, which is
free from Roland, fixes some bugs and improves functionality and sounds. Please update your module by following the link
below and carefully following all instructions given on the Roland pages.
https://www.roland.com/us/support/by_product/td-27kv/updates_drivers/
The link above is provided for your convenience only. The eDrum Workshop cannot accept any liability for any loss or damage resulting
from any updates provided by Roland support or for any changes to the content of the supplied link above. Please see Roland's
instructions and END USER LICENSE AGREEMENT of their download files for more information.
Before You Begin - Kit Variations for "AUX" Instruments
These kits contain a "snare strainer off" snare instrument on one of the AUX pad inputs that uses samples
taken with the same tunings and microphone configuration as each "main" snare instrument. Every customer
will have a preferred setup, so three variations of these kit files have been included that you can choose
between in order to find the instrument assignments that best match your current pad configuration. There
are three folders in your download -
3 Toms Splash China
4 Toms Splash
4 Toms China
You can choose which version of the kit files to install by using the .TD0 files from inside the folder that
matches your preferred setup. Please see page 4 for full installation instructions. The pad assignments may
differ depending on the files you choose - the full assignments can be seen on page 9.
If you would prefer a setup that uses 3 toms (assigned to TOM 1-3), two AUX cymbals and the "strainer off"
snare, use the files contained within the 3 Toms Splash China folder.
If you would prefer a setup that uses 4 toms (assigned TOM 1-3 & AUX3), one AUX cymbal and the "strainer
off" snare, use the files contained within the 4 Toms Splash folder for a splash cymbal as the aux cymbal or 4
Toms China folder for a china cymbal as the aux cymbal.
If you do not currently use all of the inputs available, for example if you only use 3 toms currently and no aux
inputs, you can choose any of the files. However, the tom setups differ between the 3 Toms and 4 Toms files -
see pages 8 and 9 for details. You may wish to consider future expansions to your kit when choosing the files.
If you choose one set of files and would like to add in the "missing" instruments later, there is a list of settings
that you can use to add these sounds on page 10.
It is not recommended to install multiple sets of files. Doing so may use up extra user sample memory if you
do not deselect the "With User Sample" check box. There is also a possibility that the samples will not line up
with the correct kits or pads and may need to be reassigned manually.
3