Table of Contents
Advertisement
Image Projection
Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
Press
,
,
the remote control to select the input
mode.
• • • • • When pressing
on the projector, input mode
switches in order of :
INPUT 1
INPUT 2
DIGITAL
INPUT 5
Note
• When no signal is received, "NO SIGNAL"
will be displayed. When a signal that the
projector is not preset to receive is received,
"NOT REG." will be displayed.
• The INPUT mode is not displayed when
"OSD Display" of the "Options" menu is set
to "
(OFF)". (See page 47.)
About the INPUT mode
INPUT 1
Used for projecting images
(Component)
from equipment connected
to INPUT 1 terminals.
INPUT 2
Used for projecting images
(Component)
from equipment connected
to INPUT 2 terminal.
INPUT 3
Used for projecting images
(S-Video)
from equipment connected
to INPUT 3 terminal.
INPUT 4
Used for projecting images
(Video)
from equipment connected
to INPUT 4 terminal.
Used for projecting
INPUT 5
images from equipment
(Component/
RGB)
connected to INPUT 5
terminal.
Used for projecting
DIGITAL
images from equipment
with DVI or RGB output
terminal connected to
INPUT 5 terminal.
,
,
or
on
INPUT 3
INPUT 4
INPUT 1, 2, 3, 4, 5 and
DIGITAL INPUT button
"On-screen Display of INPUT Mode (Example)
INPUT 1 mode
Using
Component
INPUT 2 mode
Using
Component
INPUT 3 mode
Using S-Video
INPUT 4 mode
Using Video
INPUT 5 mode
Component
RGB
• When switching the component and RGB
input mode, press
control or select "Signal Type" in the
"Options" menu.
DIGITAL mode
on the remote
-29
Advertisement
Table of Contents
