Table of Contents
Advertisement
Operati
Image Projection
Switching the Iris Setting
This function controls the quantity of the
projected light and the contrast of the image.
Press
IRIS.
Switching the Input
• Each time the button is pressed while the display
Mode
is on, the mode changes in the following order:
HIGH BRIGHTNESS MODE
Select the appropriate input mode for the con-
nected equipment.
HIGH CONTRAST MODE
Press Input Mode Select buttons or
Note
INPUT on the remote control to select
the input mode.
• For details, see page 37.
• When
INPUT on the remote control or
INPUT on the projector is pressed, the Input
Adjusting the Contrast
list appears. While the Input list is displayed,
follow the procedure below to switch the Input
mode.
1
INPUT or □/▼ to select the desired
1Press
Press
input mode.
ENTER.
2Press
• If
ENTER is not pressed, the projector
2
Press \ or | to adjust the con-
switches to the selected input mode in a
few seconds.
trast.
3
Press
Note
• When no signal is received, "NO SIGNAL"
will be displayed. When a signal that the
Note
projector is not preset to receive is received,
• For details, see page 36.
"NOT REG." will be displayed.
Adjusting the Quantity of Light
Adjusting the Projected
Image
1
Press
1. Adjusting the Focus
2
Press \ or | to adjust the quan-
You can adjust the focus with the focus ring on the
tity of light.
projector.
3
Rotate the focus ring to adjust the focus while
Press
watching the projected image.
2. Adjusting the Image Size
Note
• For details, see page 36.
You can adjust the image size using the zoom knob
on the projector.
Move the zoom knob to enlarge or shrink the
Downloaded From projector-manual.com Sharp Manuals
image size.
MEDIUM MODE
CONTRAST.
ENTER.
BRIGHT.
ENTER.
Adjustment buttons
"
'
\
|
(
/
/
/
)
FREEZE
Adjustment
buttons
□
▼
(
/
)
IRIS
Input Mode Select buttons
Freezing a Moving Image
INPUT
1
Press
Input mode menu
• The projected image is frozen.
2
Press
to the moving image from the cur-
rently connected device.
Selecting the Picture Mode
You can select the appropriate picture mode to best
match the projected image you are watching.
Press
PICTURE MODE.
• Each time the button is pressed while the display
is on, the mode changes in the following order:
STANDARD
MEMORY
Focus ring
Note
• For details, see page 36.
Zoom knob
ENTER
PICTURE MODE
CONTRAST
BRIGHT
ENTER
FREEZE.
FREEZE again to return
NATURAL
DYNAMIC
MOVIE2
MOVIE1
-2
Advertisement
Table of Contents
