Part Names And Functions - Sharp AN-K2LP Operation Manual

Part Names and Functions

Numbers in refer to the main pages in this operation manual where the topic is explained.
Projector
Top View
ON button
Turn the power on.
STANDBY button
Put the projector into standby
mode.
RESIZE button
Switch the picture display
(STRETCH, SIDE BAR, etc.).
ENTER button
Set items selected or
adjusted on the menu.
UNDO button
Undo an operation or
returning to the previous
display.
MENU button
Display adjustment and
setting screens.
Front View
13
Remote control sensor
31
Front adjustment foot
(on the bottom of
the projector)
31
HEIGHT ADJUST button
28
28
34
39
34
38
• Attaching the lens cap
Push the lens cap on until it clicks
into position.
• Removing the lens cap
Pull the lens cap directly outward.
10
Power indicator
10 54
Lamp indicator
10 54
Temperature warning
indicator
30
ZOOM/FOCUS button
Adjust the projected image
size or adjust the focus.
29
INPUT button
Switch input mode 1, 2, 3, 4,
5 or DIGITAL.
38
Adjustment buttons
('/"/\/|)
Select menu items and other
settings.
-9