Configure The Ports - Dell EMC VxFlex Ready Node 13G Manual

Port Configuration
Descriptio BMC
n (iDRAC)
Monitoring
Physical Mgmt
switch Switch

Configure the ports

Hardware Configuration and Operating System Installation Guide - Windows Servers
38
Table 8 Single-node server configuration (1U1N) (continued)
VxFlex VxFlex OS
OS Data1 Client
Network
Port1
Data Data
Switch1 Switch1
Note
In Storage-Only configurations, the customer ports can be used as additional data
ports.
This topic explains how to configure ports on Windows-based nodes.
Procedure
1. Get the PCI slot information of each network adapter.
a. Open the Windows Start menu, and open the Device Manager, Network
Adapters option.
Figure 4 Network Adapters - Windows 2012
Figure 5 Network Adapters - Windows 2016
b. In the list of Network adapters, double-click on each one, and take note of
the location shown in the Location field. For example, output such as PCI
Slot 2 (PCI bus 4, device 0, function 0) means that this
network adapter is on PCI 4:0, because 4 is the bus number, and 0 is the
function number.
VxFlex OS VxFlex OS
Client Data2
Network
Port2
Data Switch2 Data Switch2
VxFlex OS Not in
Management Use
Network
Mgmt Switch Not in use