Configuring The Hardware - Dell EMC VxFlex Ready Node 13G Manual

CHAPTER 2

Configuring the Hardware

The following topics describe how to configure the hardware, set BMC (iDRAC) IP
addresses, and map the ISO for servers in a VxFlex Ready Node environment.
Set up the BMC (iDRAC) IP address and
l
Verify the status of the system hardware, storage controller, and disks - 13G
l
servers............................................................................................................... 20
Open the KVM console - 13G
l
Updating the BIOS, firmware and
l
BIOS...................................................18
servers..................................................................21
settings......................................................... 22
Configuring the Hardware
17