Dell EMC VxFlex Ready Node 13G Manual page 34

Network Architecture and Physical Connectivity
Hardware Configuration and Operating System Installation Guide - Windows Servers
34
Table 5 VxFlex OS data IP network for Subnet #2 (continued)
Item Description
IP address The pools of IP addresses used for static allocation for
pool for the following groups:
Subnet #2
1. Node_DATA2_IP = internal (interconnect) IP
addresses of the VxFlex Ready Node servers
2. MDM_Cluster_Virtual_IP_DATA2 = the Virtual IP
addresses of the MDM cluster in the "Data2"
network
The formula to calculate the subnet pool or subnet needs is: N*Node_DATA2_IP
+MDM_Cluster_Virtual_IP_DATA2
Cabling
Ensure that you have the correct quantity of cables. Calculate the amount of
cables needed, as described below.
For RJ45 NIC ports on your switch, you need Cat6 6 m Ethernet cables (these
cables are included with the server nodes), four cables per node.
Comments
For clarity, the
second subnet is
referred to as
"Data2"