2X4 Crossover - dbx DriveRack Studio User Manual

Section 5

5.1 2X4 Crossover

Left Low
DriveRack Studio User Manual
30
Application Guide
This Application guide section is provided to offer suggested installation applications of the
This Application guide section is provided to offer suggested installation applications of the
DriveRack Studio that will allow you to optimize peak performance of the units. Note that the
24 included application programs represent the extensive flexibility of the DriveRack units.
These applications can be used verbatim, or as sample reference guide templates for designing
countless audio applications.
Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack Studio.
2. Connect the outputs of the DriveRack Studio and run to the selected speaker amplifier.
3. Make sure that the mixer and power amps are turned off prior to powering up the
DriveRack Studio.
Software
1. Once the desired program has been chosen, press the DATA wheel to load the program.
Left High
Right Low
DriveRack
Left
Right
Sub Woofer
®
Studio
Right High
®