Navigating The Crossover Section; Navigating The Feedback Suppression Section - dbx DriveRack Studio User Manual

Section 2
2.5 Navigating the XOVER Section
To edit the parameters of the Crossover used in a selected program, simply use the following procedure. From program mode,
press the X-OVER button. Once you have reached the Crossover module, Navigate through the Pages of the selected Crossover
module by pressing the "Next Page" or "Prev Page" buttons successively until arriving at the desired Page.
XOVER
Successive presses of the Data wheel will select
effect parameters within the currently selected page.

2.6 Navigating the Feedback Suppression Section

From program mode, press the FEEDBACK button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
DriveRack Studio User Manual
14
Editing Functions
High Pass Low Pass
Freq- 20.kHz to Out Freq- 20.kHz to Out
Type -BW6-24,LR12,24 Type- BW6-24,LR12,24
Gain- Inf to 20dB
Low Low
FEEDBACK
AFS On/Off
AFS Clear
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
DriveRack
High Pass Low Pass
Freq- 20.kHz to Out Freq- 20.kHz to Out Freq- 20.kHz to Out
Type- BW6-24,LR12,24 Type- BW6-24,LR12,24 Type- BW6-24,LR12,24
Gain- Inf to 20dB Gain- Inf to 20dB
Mid Mid
Mode - Fixed/Live
Type- Speech, Low,Med and High
Number of Fixed filters 0-12
®
High Pass
High
FEEDBACK
Live filter Lift - On/Off
Lift After - 0-60
Studio
XOVER
®