dbx DriveRack Studio User Manual page 16

Section 1
tion. Once you have selected your input option, press the <NEXT PG> button and the display
will appear as follows:
• Simply rotate the <DATA> wheel to select either a Dual Mono or Stereo linked 28-band
• Rotate the <Data> wheel to select any one of the numerous custom-tuned MAIN speaker
• Rotate the <Data> wheel to select any one of the numerous custom-tuned SUB speaker
• You are now prompted to select a power amp by rotating the <DATA> wheel to select any
• Rotate the <DATA> wheel to select the amplifier manufacturer's specified amplifier sensitivity
6
DriveRack Studio User Manual
Getting Started
Graphic EQ. Once you have selected your EQ option, press the <NEXT PG> button and
the display will appear as follows:
options available. If the speaker being used is not specified in the menu, select CUSTOM.
Once you have selected your Main speaker option, press the <NEXT PG> button and the
display will appear as follows:
Sub Speaker
Select Sub PA
>None
options available. Once you have selected your SUB speaker option, press the <NEXT PG>
button and the display will appear as follows:
High Amplifier
Select an amplifier
>Crwn MacroTech 1202
one of the numerous custom-tuned Amplifier options available. Note that the top line of the
display will either read High, Mid or Low depending on your selected speaker setup selec-
tions. Once you have selected your Amp tuning option (depending on the amp type), you
will select the specified amplifier sensitivity setting if applicable.
High Amplifier
Select Sensitivity
Crwn MacroTech 1202
>0.775 Volts
setting. Once set, press the <NEXT PG> button, and you will now be given the option of
optimizing your amp levels with the DriveRack PA. The page will appear something like this:
DriveRack
Graphic EQ Setup
Select GEQ as Dual
Mono or Stereo
>Dual Mono
®
Studio
®