Checking Lamp Usage - Epson EX30 User Manual

2. Select the menu and press
Reset
3. Select
Reset Lamp Hours
4. When you see the prompt, select
5. When you're finished, press

Checking Lamp Usage

To check the number of hours the lamp has been used, press the
button and highlight the
Menu
The life span of the lamp is about 3000 hours if the
setting in the Settings menu is set to
Control
4000 hours if the
Brightness Control
sure you have a spare lamp handy if the usage hours on this menu are
close to the life span of your lamp.
. You see this screen:
Enter
and press .
Enter
press
Yes and Enter
to exit.
Menu
menu. You see a screen like this:
Info
Brightness
(default), and
High
setting is set to
.
note
The information displayed
depends on the input signal
currently selected.
If you have used the
projector for less than
10 hours, the hours are
listed as
. Make
Low
Maintaining the Projector
.
0H
81