Resetting The Lamp Timer; Checking Lamp Usage - Epson PowerLite 1220 Installation Handbook

Epson PowerLite 1220 / 1260
note
The information displayed
depends on the input signal
currently selected.
If you have used the
projector for less than
10 hours, the hours are
0H
listed as .

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the
projector's menu system.
1. Press the Menu button on the remote control or on the
projector's control panel. You see the main menu.
2. Select the Reset menu and press
3. Select Reset Lamp Hours
4. When you see the prompt, select
5. When you're finished, press

Checking Lamp Usage

To check the number of hours the lamp has been used, press the
Menu
button and highlight the
The life span of the lamp is about 4,000 hours if
Consumption in the Settings menu is
ECO
hours if this setting is
the usage hours on this menu are close to the life span of your lamp.
Enter . You see this screen:
and press Enter .
Yes and
press
Menu to exit.
Info
menu. You see a screen like this:
Power
Normal (default), and 5,000
. Make sure you have a spare lamp handy if
INSTALLATION HANDBOOK
Enter
.
Maintenance
3