Replacing The Remote Control Batteries - Epson EX30 User Manual

caution
When replacing batteries,
take the following
precautions:
■ Replace the batteries as
soon as they run out. If the
batteries leak, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash immediately.
■
Do not expose batteries to
heat or flame.
■
Dispose of used batteries
according to local
regulations.
■
Do not use batteries other
than those specified in this
User's Guide and do not
use batteries of different
types or mix old and new
batteries.
■ Keep these batteries out of
the reach of children.
Batteries are choking
hazards and are very
dangerous if swallowed.
Maintaining the Projector
82

Replacing the Remote Control Batteries

Replace the batteries in the remote control as described below:
1. Turn the remote control over.
2. Press in on the catch on the battery cover as you lift the cover off.
EX30/EX50
3. Install two AA alkaline batteries, inserting the
shown.
EX30/EX50
4. Replace the battery cover and press it down until it clicks into
place.
EX30/EX50
EX70
and ends as
+ –
EX70
EX70