Choosing When To Display The Image - Epson EX30 User Manual

4. Use the arrow buttons to select the area of the image you want to
use. Then press
Enter
5. When you see the message
and press .
Enter
6. Use the arrow buttons to select a zoom factor (display size) and
press .
Enter
7. When the message
appears, select
Yes
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message

Choosing When to Display the Image

After your image is saved, you can set it to display as the startup
screen, the screen you see when there's no signal, or the screen you see
when you press the
A/V Mute
1. Press the button, highlight the
Menu
.
Enter
2. Select and press
Display
3. Choose from these display options:
■ Set
Display Background
when there is no signal.
Set
■ Startup Screen
projector is warming up.
Set
■ A/V Mute
the
A/V Mute
4. When you're finished, press
.
Select this image?
Save this image as the User's Logo?
and press . Saving the logo may take a
Enter
, press
Completed
button (see page 50).
Extended
.
Enter
to to display your image
Logo
to to display your image when the
On
to to display your image when you press
Logo
button.
to exit.
Menu
, highlight
Yes
to exit.
Menu
menu, and press
Fine-Tuning the Projector
note
You can lock these settings to
prevent them from being
changed without a password
(see page 68).
71