Table of Contents
Advertisement
time-division multiple access (TDMA), or carrier sense multiple access
(CSMA) protocols.
Environmental rating
The unit is certified for outdoor usage, equipped with vibration-proof
connectors, and designed for fast installation and enhanced reliability in
harsh environments.
Product specifications
For detailed product specifications, refer to the product data sheet for the
Cisco FM4200 Fiber.
Transceiver and gateway unit power consumption
In service, Cisco transceiver units and gateway units consume
electrical power at the rates given in the table below.
IMPORTANT
In service, transceiver and gateway units will consume power
at various levels between the quoted lower limit and upper
limit, depending on data traffic load, signal strength,
environmental conditions such as line-of-sight and atmospheric
moisture, and other factors.
Note that the power consumption of transceiver units tends to
be affected in inverse proportion to the unit temperature (in
other words, power consumption tends to rise when the
temperature of the unit falls, and the other way around).
Table 1. Power consumption figures (transceiver units)
Unit series
FM Ponte kit
(Model FM1200V-
HW)
FM1200 Volo
(Model FM1200V-
HW)
FM1300 Otto
FM3200-series
(Model FM3200)
FM4200-series
(Models FM4200F
and FM4200)
© 2021 Cisco and/or its affiliates. All rights reserved.
Minimum power
Nominal power
consumption
consumption
(typical conditions)
4 Watts
6 to 7 Watts
4 Watts
6 to 7 Watts
8 Watts
10 to 12 Watts
4 Watts
6 to 7 Watts
4 Watts
6 to 7 Watts
Getting Started
Maximum power
consumption
(realistic system-
design
assumption)
10 Watts
10 Watts
15 Watts
10 Watts
10 Watts
Page 15 of 189
Advertisement
Table of Contents
