Table of Contents
Advertisement
7.
By default, the RADIUS inactivity Expiration (s) period is 28 800
seconds (8 hours). Do not change the expiration period unless
there is a specific need to do so.
8.
Choose the data authentication method by clicking the
Authentication Method drop-down and clicking the correct
option. Available options are:
• MSCHAPV2
Authentication Protocol V2)
• MD5 (Hash function producing a 128-bit hash value)
• GTC (Generic Token Card)
• TTLS (Tunneled Transport Layer Security)
• PEAP (Protected Extensible Authentication Protocol)
9.
Enter the personal username for access to the RADIUS server in
the Username field.
10. Enter the personal password for access to the RADIUS server in
the Password field. To read the password as it is typed, check
the show check-box.
11. Available Inner Authentication Methods depend on which
Authentication Method has been chosen. If applicable, choose an
inner authentication method by clicking the Inner Authentication
Method drop-down and clicking the correct option. Available
options are shown in the following table:
Table 5. Available inner authentication methods (per
authentication methods)
Authentication
Method
MSCHAPV2
MD5
GTC
TTLS
PEAP
12. Save the RADIUS settings by clicking the Save button.
Alternatively, clear the settings by clicking the Reset button.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
(Microsoft
Available Inner Authentication Methods
None
None
None
• PAP (Password Authentication Protocol)
• CHAP (Challenge-Handshake
Authentication Protocol)
• MSCHAP (Microsoft Challenge-Handshake
Authentication Protocol)
• MSCHAPV2
• MD5
• GTC
• MSCHAPV2
• MD5
• GTC
Challenge-Handshake
Page 127 of 189
Advertisement
Table of Contents
