Envelopes - Epson Stylus Color 640 User Manual

Note:
If the stack of
envelopes is more
than 0.4-inch
(10 mm) thick, press
each envelope flat
before stacking it or
load one envelope
at a time.
Printing on Special Media

Envelopes

You can load up to 10 envelopes
at a time. Load the envelope flap
edge first and printable side up.
Place it against the right edge
guide and adjust the left edge
guide as shown:
Select Plain paper as the Media
Type and choose the correct
envelope size as the Paper Size
setting in the printer software.
Set the thickness lever to the + position when you print on
envelopes. Open the printer cover and position the lever as shown
below. Then close the cover and print. (Make sure you return the
lever to the 0 position before you print on regular media.)
Page 67