Epson Stylus Color 640 User Manual page 135

Paper doesn't feed
Try this
Remove the stack of
paper from the sheet
feeder.
Paper jams inside the printer
Try this
Turn off your printer,
open the cover, and
remove all the paper
that's inside, including
any small pieces that
may have torn off.
Troubleshooting
Then do this
Check that the paper:
Isn't curled or creased.
Isn't too old (see
paper packaging for more information).
Isn't loaded above the arrow on the left edge guide.
Isn't jammed inside the printer. (If the S paper out light is flashing,
paper is jammed.)
Then reload the paper as described in
Guidelines, making sure the left edge guide is adjusted to fit the paper's
width.
Then do this
Reload the paper as described in the Printer Basics book and
Special Media. If your paper jams frequently, make sure you:
Use smooth, high-quality paper, loaded printable side up.
Fan the stack and then even the edges before loading it.
Don't load paper above the arrow mark on the left edge guide.
Place the paper against the right edge guide and adjust the left edge
guide to fit the width of your paper.
Media Loading and Handling Guidelines
Media Loading and Handling
or your
Printing on
Page 135