Installing The New Cartridge - Epson Stylus Color 640 User Manual

Warning:
If ink gets on your
hands, wash them
thoroughly with soap
and water. If ink gets
into your eyes, flush
them immediately with
water.
Caution:
You must remove only
the yellow tape seal
from the top of the
cartridge; leaving
the tape on will
permanently damage
it. Do not remove the
clear seal from the
bottom of the cartridge;
ink will leak.
Maintenance and Transportation
5 Lift the cartridge out of the printer and dispose of it carefully.
6 Follow the steps in the next section to install the new ink
cartridge.

Installing the New Cartridge

Once you have removed the empty cartridge, you're ready to install
the new one. Follow these steps:
1 Remove the new ink cartridge from its package.
2 Remove only the yellow part of the tape seal on the top of the
cartridge. Do not remove the blue label. (It's okay if a bit of the
yellow tape does not tear off.)
black cartridge
remove
color cartridge
Page 106