Setting Up Additional Computers - Epson Stylus C80WN Setup And Installation Manual

Setting Up Additional Computers

To set up additional computers, you need to install the EPSON Stylus C80WN
printer driver and configure a network port on every computer using the printer.
Before you begin, do the following:
I
Make sure your computer's wireless mode is set to either
connecting to the printer through an access point, or
connecting without an access point. If your wireless adapter doesn't include an
802.11b Ad Hoc
mode your adapter uses to communicate without an access point. Do not select a
pseudo ad hoc or proprietary ad hoc mode. See the documentation for your
wireless adapter for instructions.
I
If you're using infrastructure mode, make sure there is a link with good signal
strength between the computer and the access point.
Then follow these steps to set up other computers to use the printer:
1. Follow steps 1 through 6 on pages 20 to 21.
2. If you're running Windows Me, 98, or 95, double-click
Print Utility
instructions on the screen to install the utility.
3. Restart your computer.
4. Set up a network port on your computer:
I
If you're running Windows XP, go to "Setting Up a Network Port on
Windows XP" on the next page.
I
If you're running Windows 2000, go to "Setting Up a Network Port on
Windows 2000" on page 30.
I
If you're running Windows Me, 98, or 95, go to "Setting Up a Network Port
on Windows Me, 98, or 95" on page 32.
I
If you're running Windows NT, go to "Setting Up a Network Port on
Windows NT" on page 33.
28
Installing Software and Configuring the Print Server
option, select
Ad Hoc
on the EPSON Installation Program screen and follow the
Infrastructure
802.11b Ad Hoc
,
Computer-to-Computer
Install EpsonNet Direct
, if you are
if you are
, or whatever