Macintosh System Requirements - Epson Stylus C80WN Setup And Installation Manual

Macintosh System Requirements

For wireless printing with the EPSON Stylus C80WN, make sure each Macintosh
meets the following requirements:
I
An Apple iBook, iMac,
Power Mac G3 or G4
I
®
Mac OS 8.6 through 9.2 (Mac OS 9.2 recommended)
I
32MB of available RAM (64MB recommended)
I
100MB of free hard disk space (200MB recommended)
I
VGA display or better
I
CD-ROM or DVD drive for installing the printer software
In addition, each computer either needs to have a wireless adapter installed, or needs
to be connected to an existing wired network that has a wireless access point or
AirPort Base Station.
I
Make sure the access point supports AppleTalk.
points, see EPSON's web site at: http://support.epson.com.
I
For computers not connected to a wired network, you need an AirPort card or
Macintosh-compatible wireless adapter. Make sure your card or adapter works in
ad hoc mode if you want to print without an access point. For a list of supported
adapters, see EPSON's web site at: http://support.epson.com.
I
If you are using an AirPort card or the AirPort Base Station, use AirPort software
version 1.3 or later.
4
Introduction
™
PowerBook G3 or G4, Power Mac G4 Cube, or
If you are using Mac OS X, check the EPSON website for driver
updates and support information. Connect to the Internet, then go to
http://support.epson.com.
If you are using AirPort, Epson recommends that you use the print
server with an access point or AirPort Base Station. With AirPort, your
print server works more reliably in infrastructure mode.
®
For a list of supported access