Epson Stylus C80WN Setup And Installation Manual page 50

You want to use a password on your AirPort network.
Because AirPort uses passwords that do not follow the standard for WEP
encryption, you need to change your network password to a hexadecimal value.
Follow these steps:
1. Create a computer-to-computer network without password protection on the
Macintosh computer that you use to configure the print server.
2. Follow the steps beginning on page 36 to install the printer driver and
WP-Admin, and to establish a connection to the print server.
3. Make the following selections on the Wireless Server Configuration screen:
I
Select
I
In the 64Bit Key 1 box, enter a hexadecimal value consisting of 10 digits, or a
combination of digits and letters. Digits can be from 0 to 9, and letters must
be between A and F. For example:
I
If you have an AirPort Base Station, enter a name for your network in the
SSID box. Then change the Wireless Mode to
4. Make any other changes that you want to the Wireless Server Configuration
screen and click
.
QUIT
5. If you want to use the printer in computer-to-computer (ad hoc) mode, go
to step 6.
If you have an AirPort Base Station, do the following:
I
For Network Name, configure the base station to use the name that you
entered in the SSID box on the Wireless Server Configuration screen.
I
For Network Password, select the hexadecimal value that you entered in the
64Bit Key 1 box, preceded by the number zero (0) and lowercase letter x. For
example:
46
Solving Wireless Printing Problems
in the WEP key box.
64BIT
. When you see the Wireless Server Search window, click
OK
. Then go to step 7.
0x62B91F2A98
.
62B91F2A98
Infrastructure
.