Installing And Setting Up On The First Macintosh - Epson Stylus C80WN Setup And Installation Manual

I
If you want your AirPort network to be password protected, you need to change
your password to a hexadecimal value. Follow the instructions beginning on
page 46 to install and configure your software.
If Your Macintosh Has a Non-AirPort Wireless Adapter
Do the following if your Macintosh has a non-AirPort wireless adapter:
I
Make sure your Macintosh computer's wireless mode is set correctly. Set it to
Infrastructure
you are connecting without an access point. If your adapter does not include an
802.11b Ad Hoc
or whatever mode your adapter uses to communicate without an access point. Do
not select a pseudo ad hoc or proprietary ad hoc mode. See the documentation for
your wireless adapter for details.
I
If you're using infrastructure mode, make sure there is a link with good signal
strength (greater than 50 percent) between the Macintosh and base station or
access point. See your wireless adapter's documentation for details.
I
If you're configuring the print server from a Macintosh with a non-AirPort
wireless adapter, make sure WEP (Wired Equivalent Privacy) is disabled before
you begin. See the documentation for your wireless adapter for instructions.

Installing and Setting Up On the First Macintosh

To set up printing on the wireless network, install the wireless configuration utility
and configure the print server on your first Macintosh. You also need to install the
EPSON Stylus C80 printer driver to print from this Macintosh.
Installing the Printer Driver
Follow these steps to install the printer driver:
1. Insert the printer CD-ROM in your drive.
2. Double-click the
have to double-click the
open automatically.)
36
Installing Software and Configuring the Print Server
if you are connecting through an access point, or
option, set the wireless mode to
Printer Driver Installer
EPSON
,
Ad Hoc Computer-to-Computer
folder in the EPSON window. (You may
icon on your desktop if the window doesn't
if
802.11b Ad Hoc
,