Epson Stylus C80WN Setup And Installation Manual page 30

8. If you want to enable WEP encryption, do the following:
I
Select either
version of WEP your network supports.
I
Enter your WEP key in either the 128Bit Key 1 box or the 64Bit Key 1 box.
I
If you're using an access point, set the Wireless Mode to
(Remember to enable WEP and reset the wireless mode on your computer
when you're done configuring the print server.)
I
Make sure the SSID matches your wireless network's SSID.
9. Make any other changes you want and
click . When you see the Wireless
OK
Server Search window again, click
.
QUIT
26
Installing Software and Configuring the Print Server
or
64BIT 128BIT
You can enter up to four WEP keys on the screen. (Changing your
WEP key periodically adds to network security.) To communicate,
every node on the network must use the same WEP key. For more
information about WEP keys, check the documentation for your
wireless adapter or access point, or ask your network administrator.
in the WEP Key box, depending on which
.
Infrastructure