Select Italic Mode - Epson LQ-1050 User Manual

Character Sets
ESC t
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Selects the character table used by codes 128 to 225. Selecting a
graphics character set does not disable italic printing. Italic
printing can still be selected by ESC 4. The following values
can be used for
0: Selects italics character table.
1: Selects a graphics character set.
2: Selects the user-defined character table and remaps user-
defined 0-127 to 128-255.
Note that the value of n must equal 100 hex, 01 hex, or 02 hex.
See the Appendix for character sets.
ESC 4
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Causes characters from the italic character table to be printed.
This command is valid even if a graphics character set has been
selected by ESC t or by DIP switches, but the character
graphics are not italicized.
9-34 Command Summary
ESC t
116
27
1B 74
:
II
ESC 4
27 52
1B 34
Select Character Set
n
n
n

Select Italic Mode