Loading Single Sheets
Your cut sheet feeder also has a single-sheet loading feature. This
feature is especially useful because it allows you to switch to a
different type or size of paper without replacing the stack of paper
already in your cut sheet feeder.
1. Make sure that the paper release lever is in the single-sheet
position.
CAUTION: If you are using the double-bin cut sheet
feeder, make sure that bin 1 is selected by the LOAD/EJECT
button or with the ESC EM software command.
2. Press the ON LINE button to take the printer off line.
3. Align the single sheet to be fed with the mark on the left paper
guide. Then slide the sheet into the paper path until you feel
resistance.
Using the Printer Options
5-23