Selecting An International Character Set - Epson LQ-1050 User Manual

Selecting an International Character Set

International character sets provide you with characters and symbols
used in other languages. You can select one of eight international
character sets by changing the DIP switch settings.
Whenever the printer is turned on, reset, or initialized, the character
set selected by the DIP switches becomes the default character set.
To select an international character set, set DIP switches 1-1, 1-2, and
1-3 according to the table below. DIP switch 14 must be off.
This table also shows the characters that differ in each international
character set.
Country
23 24 40 5B 5C 5D 5 E 60 7 B 7C 7D 7 E
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark
5 Sweden
6 Italy
7 Spain I
Note: To change the setting of a DIP switch, first turn off the
printer, change the DIP switch setting, and then turn the printer
back on.
Using the Printer
3-28
ASCII code hex DIP SW
1-1 1-2 1-3
ON
ON ON
ON
ON OFF
ON OFF ON
OFF
ON OFF
OFF ON ON
OFF ON OFF
OFF OFF
ON
OFF OFF OFF