Generator Metering Menu - Kohler 38RCLA Manual

3.10 Generator Metering Menu

The generator metering menu displays the generator
voltage and frequency. See Figure 3-10.
The voltage calibration mode can be entered from the
generator metering menu.
Generator ---->
Metering
Three-phase
Volts L1--L2:
Volts L2--L3:
Volts L3--L1:
Frequency:
Figure 3-10 Generator Metering Menu
36 Section 3 RDC2 Controller Operation
Single-phase
Volts:
240 V
Frequency:
240 V 60.0 Hz
240 V
60.0 Hz
Reset
Calibration
<---- Return
Voltage Calibration
DANGER
Hazardous voltage.
Will cause severe injury or death.
This equipment must be installed and
serviced by qualified
personnel.
The voltage calibration mode can be entered from the
Generator Metering menu. Contact a Kohler-authorized
distributor/dealer for service.
The Reset Calibration menu allows you to set the
voltage reading back to the original value after
calibration, if necessary. See Figure 3-10.
240 V
Reset
Calib? No
Reset
Calib? Yes
electrical
tp6810
TP-6810 6/15