Ats Status Menu - Kohler 38RCLA Manual

3.14 ATS Status Menu

ATS menus appear if a Model RXT transfer switch is
connected to the generator set. If no transfer switch is
connected, or another model ATS is connected to the
engine start connections, Remote ATS is displayed on
the ATS Status screen.
ATS ---->
Status
Figure 3-14 ATS Status Menu, with Calibration
TP-6810 6/15
The ATS Status menu displays Model RXT transfer
switch and source information.
The voltage shown in these menus can be calibrated.
Contact an authorized distributor or dealer for service if
calibration is required.
ATS Position:
Normal
Normal Status:
Not/Acceptable
Emerg. Status:
Standby
Single-phase
Voltage:
240V
Frequency:
60.0 Hz
Reset
Calibration
<---- Return
Note: If there is no Model RXT transfer
switch connected to the generator set,
Remote ATS is displayed and the other
screens on this page do not appear.
Three-phase
Voltage L1--L2:
240 V
Voltage L2--L3:
240 V
Voltage L3--L1:
240 V
Frequency:
60.0 Hz
Reset
Calib? No
Reset
Calib? Yes
Section 3 RDC2 Controller Operation
tp6810
39