Epson EPI-4000 User Manual page 81

SelecType Menus and Options
Menu 5: Auto Continue
The setting for the auto continue menu determines whether a page
continues to print after certain errors occur. To make the printer
stop when an error occurs, set auto continue to off. The factory
setting is 51: on.
Option
0
1
Setting auto continue on or off determines what the printer does
when one of the following errors occurs:
Paper size error (PS)
If the printer is set for a size of paper different from the size loaded
in the paper tray, a paper size error occurs. The display reads PS
and the printer goes off line.
When auto continue is off:
If the auto continue menu is set to off (50), you can press
•
MANUAL FEED to recover from the paper size error. Your printer
ejects the paper and goes off line. Then you can change the
paper to the same size as the SelecType setting. Press ON LINE to
print on the correct size of paper.
If you want to continue printing
•
just press ON LINE. Your printer will print on that paper;
however, some data may be lost if the paper size is narrower
than the SelecType size setting.
Using the Printer
2-14
Setting
O f f
On
the original, off-size paper,
on