Epson EPI-4000 User Manual page 179

Problem
The position of the
printout is not what
you expected.
The printed page length
differs from the actual
length the paper.
of
The right or left margin
setting does not match
the actual width
paper.
Line spacing is
incorrect.
Solution
Your software may be overriding your
page length settings. Check that the page
length setting in your application
program is set correctly for the selected
page length. You can also change the
page length with SelecType if you are
using LQ or FX emulation mode. See
Chapter 2 to change SelecType settings.
The margin settings of your application
program may be incorrect. Change the
the
application program margin settings.
of
Your software may be set up incorrectly.
Check the printer setting in the software
and the printer mode setting of your
printer.
Note: Experienced printer users can
use the data dump mode, as described
later in this chapter, to check the data
being sent from the computer to your
printer. In data dump mode, data is
printed in hexadecimal notation and in
ASCII characters.
Printing Problems
Troubleshooting
6-25