Epson EPI-4000 User Manual page 159

Epson epi-4000: user manual
Hide thumbs Also See for EPI-4000:
Table of Contents

Advertisement

H d Hexadecimal dump mode
This status menu appears when the printer is set to hexadecimal
data dump mode. See Data Dump Mode later in this chapter for
information on running a data dump.
Ho Head
hot
The print head is overheated. The printing speed may slow down,
but printing continues. You may also notice a decline in print
quality. If this error message occurs often, move the printer to a
cooler location.
I C Ink charging
This status message appears when the printer is charging the print
head with ink.
I E Ink end
The ink cartridge is completely empty or no ink cartridge is
installed. Replace the ink cartridge as described in Chapter 5 or
install an ink cartridge as described in Chapter 1.
I L Ink
low
The ink cartridge is nearly empty. You can print up to 20 average
letter size pages after this message first appears. Then when the
I
message appears, replace the ink cartridge as described in
E
Chapter 3.
L
LQ emulation mode
When you select LQ emulation mode, the printer displays this status
message for a short time.
Status and
Error
Troubleshooting 6-5
Messages

Advertisement

Table of Contents
loading

Table of Contents