Ozone Safety - Epson EPL-5700L Getting Ready

Ozone safety

Ozone emission
Ozone gas is generated by laser printers as a by-product of the
printing process. Ozone is produced only when the printer is
printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per
million (ppm) expressed as an average time-weighted
concentration over an eight (8) hour period.
The EPL-5700L laser printer generates less than 0.01ppm for eight
hours of continuous printing when considering a closed room of
approximately 1000 cubic feet (8'
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the
following conditions:
Use of multiple laser printers in a confined area (see above)
Operation in conditions of extremely low humidity
Poor room ventilation
Continuous printing for a long period combined with any of
the above
Printer location
The printer should be located so that the exhaust gases and heat
generated are:
Not blown directly into the user's face
Vented directly out of the building whenever possible
10' 12').
Safety Information
41