If an incorrect amount of memory is shown on the status sheet,
turn off the printer and review the steps above to make sure you
correctly installed the SIMM. If the amount of memory is still
incorrect, contact your dealer or a qualified service person for
assistance.
Removing
1. To access the printer's RAM slots, perform steps 1 through 4
in "Memory Module" on page 11.
2. Pull the clips on each side of the RAM slot outward to release
the memory module.
3. Grasp both sides of the SIMM and pull it out.
4. To complete the procedure, follow steps 6 through 9 in
"Memory Module" on page 11.
16
Installing the Options