Epson EPL-5700L Getting Ready page 10

When removing or installing a new photoconductor unit,
avoid exposing it to light. The green cylinder, visible through
the openings in the unit, is a light-sensitive drum. If the
photoconductor unit is out of the printer for a long period,
covering it with an opaque cloth prevents extended exposure
to light and possible damage. Exposure to light will damage
the drum, resulting in dark or light areas on the printed page
and may shorten the service life of the unit.
Be sure not to scratch the surface of the drum. When you
remove the photoconductor unit from the printer, always set
the unit on a clean, smooth surface. Also, avoid touching the
drum, as oils from your skin can permanently damage its
surface and may affect print quality.
To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gasses (such as ammonia). Avoid locations subject
to extremes or rapid changes of temperature or humidity.
Also, be sure to keep the consumable components out of the
reach of children.
Hinweis:
Die Geräteanschlußleitung muß den einshlägigen Normen genügen. Es
muß eine dreiadrige Leitung verwendet werden. Die Anshlußleitung
darf nicht leichter als H05VV-F order H05VVH2-F sein.
Safety Instructions
3