If you use an extension cord with the printer, make sure the
total ampere rating of the devices plugged into the extension
cord does not exceed the cord's ampere rating. Also, make
sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet's ampere rating.
Never push objects of any kind through cabinet slots as they
may touch high voltage points or short out parts that could
result in fire or electric shock.
Never spill liquid of any kind on the printer.
Except as specifically explained in this guide, do not attempt
to service this product yourself. Opening or removing covers
that are marked "Do Not Remove" may expose you to high
voltage or other risks. Refer all servicing in those
compartments to a qualified service representative.
Unplug this printer from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B.
If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the operating
instructions are followed.
E.
If it has been dropped or the cabinet has been damaged.
F.
If it exhibits a distinct change in performance, indicating
a need for service.
Safety Instructions
5