Running The Program - Epson Apex 80 User Manual

200
FOR X=1 TO 9
210 LPRINT CHR$(F(X));:NEXT X
220 LPRINT CHR$(0)CHR$(0);
230
LPRINT "YOUR CHARACTER IN PICA: < < <"
240 LPRINT "IN DOUBLE-WIDE EMPHASIZED PICA: ";
250 LPRINT CHR$(27)"!*< < <("
260 LPRINT CHR$(27)"!"CHR$(0) "YOUR DATA NUMBERS:"
270 FOR K=1 TO
300 LPRINT: END
The next few sections explain the steps used to create the symbol for
Mercury. First, Figure 5-3 shows the grid used to design the character.
Figure 5-3.
Design for character

Running the program

Now run the program. For each of the nine columns, the program
asks for the numbers of the rows in which you want dots to appear.
Enter the row numbers one at a time, pressing the
each one. When you have entered all the numbers for a column or
when you want no dots in a column, press
Remember that the vertical lines in the grid are the even-numbered
columns.
5-4
9:
LPRINT F(K);: NEXT K
Enter
without a number.
Enter
User-defined Characters
key after