International Character Sets - Epson Apex 80 User Manual

The following tables describe the switches and their functions.
The first two tables summarize the two groups of switches. The
remaining table shows how to set the DIP switches for the available

international character sets.

Table D-1. DIP
switch group 1
Switch
Function
number
Select condensed or normal
1-1
characters
Select slashed or unslashed zero
1-2
Select character table
1-3
1-4 Paper-out detection
Select print quality
1-5
Select international character set
1-6
1-7
1-8
Table D-2. DIP switch group 2
Switch
Function
n u m b e r
Select page length
2 - 1
Select cut sheet feeder mode
2-2
2-3 Skip-over-perforation
2-4
A d d l i n e c a r r i a g e r e t u r n
Note: The factory setting for all switches except 1-6, 1-7, and 1-8 is OFF.
International Character Sets
Thirteen international character sets are available in Epson mode.
Eight of these are selected by DIP switches 1-6 to 1-8 and the remaining
five (Japan, Norway, Denmark II, Spain II and Latin America) can be
selected with the ESC R command, which is described in the
Command Summary (Appendix A). For the characters available in
each character set, see Appendix B.
Defaults and DIP Switches
Action
Action
when ON when OFF
Normal
Condensed
0 0
Italics
Graphics
Active
Inactive
Draft
NLQ
See Table D-3
Action
A c t i o n
when ON
w h e n O F F
1 2 i n c h 1 1 i n c h
Selected Not selected
1 inch
N o n e
C R + L F
CR only
D-3