Technical Specifications; Printing; Paper - Epson Apex 80 User Manual

Appendix F

Technical Specifications

This appendix contains the specifications for the Apex80, including
the built-in parallel interface.

Printing

Printing method
Impact dot matrix
Printing speed
180 characters per second in draft elite
150 characters per second in draft pica
25 characters per second in NLQ pica
Printing direction
Bidirectional logic-seeking for text printing
Unidirectional for graphics and by software command for text
Character sizes
All except superscript and subscript are 3.1 mm high. The widths
and characters per inch (CPI) are given below:
Mode Width (mm) CPI Mode
Pica
Elite
Line spacing
l/o-inch, or programmable in increments of 1/216th of an inch

Paper

Number of copies
One original plus two copies; total thickness not to exceed 0.01 in.
(0.25 mm)
Paper width
Continuous feed:
Single-sheet:
Technical Specifications
2.1 10
1.5 12
4 to 10 in.
7.15 to 8.5 in.
Condensed Pica
Condensed Elite
Width (mm) CPI
1.05
1.05
17
20
F-1