Word Processing; Character Sets - Epson Apex 80 User Manual

Word Processing

ESC a
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when the buffer becomes full or when one of the following is
received: CR, VT, LF, FE The commands HT and BS are invalid
except in = 0 mode. For
n
within a paragraph. Justification can be used in NLQ only, not draft.

Character Sets

ESC t
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for
0: Selects italic character set.
1: Selects Epson Character Graphics.
Selects which character table is to be used by codes 128-255.
Selecting Epson Character Graphics does not disable italic printing.
Italic printing can still be selected by ESC 4. Duplicates the function
of DIP switch 1-3. Note that the value of
hex; the characters "0" and "1" cannot be used.
A-26
a
ESC
27 a
1B 61
= 3 there must be no carriage returns
n
ESC t
27
116
1 B 74
NLQ Justification
n
n
n
Select Character Table
n
n
n
n:
must equal 00 hex or 01
n
Command Summary