DN
1. Power trim and tilt switch
DN
1
1. Power trim and tilt switch
EMU28062
Shallow water
EMU40701
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM02360
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
1
ZMU06941
ZMU06987
1
1. Cooling water inlet
EMU40711
Procedure for shallow water cruising
1.
Move the remote control lever to the
neutral position.
2.
Push the "
" (up) side of the power trim
and tilt switch to tilt the outboard motor
up slightly to the desired position.
WARNING! Using the power trim and
tilt switch on the bottom cowling
Operation
ZMU06942
N
ZMU07034
N
ZMU06926
65