Table of Contents
Advertisement
Trouble Recovery
1
2
3
1. O-ring
2. Filter cup
3. Water detection switch lead
8.
Connect the water detection switch cou-
pler securely until a click is heard.
9.
Install the fuel filter cover, and then tight-
en the bolts.
10. Install the top cowling.
11. Turn the main switch to the "
sition and check that the water separa-
tor-alert indicator remains off and the
buzzer does not sound. If the water sep-
arator-alert indicator blinks or the buzzer
sounds, have your Yamaha dealer
check the outboard motor. NOTICE: Al-
though the buzzer will stop when the
engine is started and the remote con-
trol lever is moved to the forward or
reverse position, do not use the out-
board motor. Otherwise, serious en-
gine damage could occur.
EMU41260
Treatment of submerged
outboard motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately. NOTICE: Do not attempt to run the
outboard motor until it has been com-
pletely checked.
[ECM02320]
94
ZMU07522
" (on) po-
[ECM02390]
Advertisement
Table of Contents
