Command Link Multifunction Speedometer - Yamaha VF200 Owner's Manual

Instruments and indicators
1
1. Set button
2. Mode button
1. Speedometer
2. Fuel meter
3. Multifunction display
EMU41042
Command Link Multifunction
Speedometer
The speedometer unit shows the boat speed
and has functions of fuel meter and system
voltage display. The chosen display is se-
lected using the "
(mode) buttons as described in this section.
In addition, the speedometer can show the
desired unit of measurement such as km/h,
mph, or knots. If the speed sensor is in-
stalled, the unit can also show the trip dis-
play. However, even if the speed sensor is
not installed, the trip display can be shown
42
2
ZMU05434
1 2
3
ZMU05435
" (set) and "
by connecting an optional sensor to the unit.
In addition, if optional sensors are connected
to the unit, water surface temperature dis-
play, depth display, and clock will also be
available. For the optional sensors, consult
your Yamaha dealer.
After the main switch is first turned to the
" " (on) position, all of the displays come on
as a test. After a few seconds, the unit will
change to normal operation.
For more information, see the operation
manual for the meters.
1
1. Set button
2. Mode button
1
3
"
1. Speedometer
2. Fuel meter
3. Multifunction display
2
ZMU05436
2
ZMU05437