Table of Contents
Advertisement
EMU28051
Procedure for tilting down (power
trim and tilt/power tilt models)
Power trim and tilt model / power tilt model
1.
Push the power tilt / power trim and tilt
switch "
" (up) until the outboard motor
is supported by the tilt rod and the tilt
support lever / tilt support knob becomes
free.
2.
Release the tilt support lever or pull out
the tilt support knob.
3.
Push the power tilt / power trim and tilt
switch "
" (down) to lower the outboard
motor to the desired position.
UP
DN
DN
ZMU01885
EMU28060
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU28090
Power trim and tilt models / power tilt
models
The outboard motor can be tilted up partially
to allow operation in shallow water.
EWM00660
WARNING
Place the gear shift in neutral before
G
setting up for shallow water cruising.
ZMU01936
Return the outboard motor to its normal
G
position as soon as the boat is back in
deeper water.
ECM00260
CAUTION:
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
Operation
DN
DN
ZMU01980
ZMU01979
38
Advertisement
Table of Contents
