Checks
Checking information
The following information can be checked:
■
Annual consumption: Power consumption as calcula-
ted by the control unit. The actual power consump-
tion may vary.
■
Proportion of DHW heating provided by the immer-
sion heater and the heat pump in the last 30 days
Example:
Fig. 22
Display
Meaning
"142" "kWh / 30
The appliance consumed 142 kWh
days"
in the last 30 days.
"HR:22" %
Time percentage of DHW heating
provided by the immersion heater in
the last 30 days: 22 %
"HP:78" %
Time percentage of DHW heating
provided by the heat pump in the
last 30 days: 78 %
Checking messages
Messages are shown if your DHW heat pump experi-
ences particular events or operating conditions.
20
Displaying information
1. Use
to select information
2. Use OK to switch between displays.
Note
To reset the values, press
ously.
3. Return to the last operating program with
If faults occur, notify your contractor. Tell your contrac-
tor which fault message is being displayed ("ER 0" to
"ER 10"). This enables the contractor to be better pre-
pared and may save you unnecessary travelling costs.
.
and OK simultane-
.