Setting Operating Programs; Application Limits; Eco" Operating Program - Viessmann VITOCAL 060-A Operating Instructions For The System User

Operating programs

Setting operating programs

Use to select the required operating program.

Application limits

Note
The heat pump only switches on at outside tempera-
tures between –5 and 35 °C.
Outside this range, the immersion heater may be acti-
vated.
Example: Heat pump in outdoor air mode
70
62
60
50
40
30
-5 0
Air intake temperature in °C
Fig. 3
DHW temperature achievable with the heat pump:
A
62 °C

"ECO" operating program

DHW is only heated by the heat pump and only up to
the max. DHW temperature of the heat pump.
Outside temperature from –5 °C to +35 °C
0
DHW temperature in °C
Fig. 4
Heat pump
A
Immersion heater
B
DHW temperature achievable with the heat pump
C
(cont.)
A
6 10
Note
The DHW temperature that the heat pump can achieve
depends on the air intake temperature.
The maximum is 62 °C.
20 30
Outside temperature below –5 °C or above +35 °C
0 10
DHW temperature in °C
Fig. 5
Heat pump
A
Immersion heater
B
DHW temperature achievable with the heat pump
C
DHW heating
11