Scanning Information - Viessmann Vitotronic 200 Operating Instructions For The System User

Scanning information

Subject to the components connected
and settings made, you can scan current
temperatures and settings, time pro-
grams and operating states.
You can scan information in the standard
menu and in the extended menu.
Note
If heating/cooling circuits have been des-
ignated (see page 44), the designated
name is displayed.
Standard menu
1. "Information"
2. Select the required scan.
All information is listed in the menu
overview (see page 56).
Note
Information relevant to the heating/
cooling circuits about the current
operating program and the current
operating status set via the time pro-
gram is then displayed.
Extended menu
This menu divides the information into
categories. All information regarding
these individual categories is shown in
the menu overview (see page 57).
■ "System"
■ "Heating circuit 1"
■ "Heating circuit 2"
■ "Heating circuit 3"
■ "Cooling circuit SKK"
■ "DHW"
■ "Solar"
■ "Heat pump"
■ "Daily log" (see page 47)
Extended menu
1.
2. "Information"
3. Select the category.
4. Select the required scan.
Scanning in conjunction with solar
thermal systems
Standard menu
"Solar energy"
The solar energy yield for the past 7 days
is displayed on a graph.
The flashing line on the graph indicates
that the current day is not yet over.
Solar energy
4.0
0
We Th Fr
kWh We 18.02.09
Select with
Note
In the extended menu, you can scan
additional information relating to the
solar circuit, e.g. the current collector
temperature, under "Information" in the
"Solar" category.
Daily log
The daily log lists the following informa-
tion for each calendar week ("CW") in
tabular form:
"T.in" Average temperature on entry
into the heat pump
"T.out" Average temperature at the out-
let from the heat pump
"HP1" Hours run, heat pump stage 1
Scanning
Sa Su Mo Tu We
1.3
47